Installing and Removing your LED lights
We recommend inserting your lights into the back side of the prop (the engraved side) at a 45-degree angle. Then, gently squeeze the light so it sits flush with the material. The hole is intentionally snug to prevent the light from easily falling out and getting lost.
![](https://i0.wp.com/sticusa.com/wp-content/uploads/2024/07/DSC09334.jpg?fit=1024%2C1024&ssl=1)
![](https://i0.wp.com/sticusa.com/wp-content/uploads/2024/07/DSC09335-1.jpg?fit=1024%2C1024&ssl=1)
Installing Common Mounting Hardware
- Begin by inserting the provided bolt through the prop. For optimal results, position the bolt head on the smooth side (face) of the hood prop.
![](https://i0.wp.com/sticusa.com/wp-content/uploads/2024/07/Bolt-1.jpeg?fit=1024%2C1024&ssl=1)
![](https://i0.wp.com/sticusa.com/wp-content/uploads/2024/07/Bolt-2.jpeg?fit=1024%2C1024&ssl=1)
3. Add the second nut to the bolt, screwing it on halfway.
![](https://i0.wp.com/sticusa.com/wp-content/uploads/2024/07/Bolt-3.jpeg?fit=1024%2C1024&ssl=1)
This setup typically works well for most applications, but adjustments may be required based on your vehicle.
![](https://i0.wp.com/sticusa.com/wp-content/uploads/2024/07/Bolt-4.jpeg?fit=1024%2C1024&ssl=1)
Using your Prop Stic
Insert the bolt into the lower latch mechanism. Be cautious with spring-loaded mechanisms; avoid exerting excessive pressure on the bolt to prevent damaging the prop.
![](https://i0.wp.com/sticusa.com/wp-content/uploads/2024/07/DSC09337.jpeg?fit=1024%2C1024&ssl=1)
Once the bolt is secured into the lower mechanism, you can then secure the top by hooking the prop’s hook onto the striker loop on your hood.
![](https://i0.wp.com/sticusa.com/wp-content/uploads/2024/07/DSC09341.jpeg?fit=1024%2C1024&ssl=1)
Your prop is now secured in place and ready to be enjoyed 🙂
![](https://i0.wp.com/sticusa.com/wp-content/uploads/2024/07/DSC09313.jpeg?fit=1024%2C1024&ssl=1)